Let us learn what should we pay attention to when transporting food with PTFE Teflon steamed bun machine non-stick conveyor belt!
Food conveyor belt materials include PVC, polyethylene, polypropylene, polypropylene, PP, plastic steel ACETAL, PE, nylon, PA, etc. There are corresponding special conveyor belts according to specific foods. For example: aquatic product conveyor belts require grid water penetration , but also anti-corrosive and easy to clean. Common ones include: vegetable conveyor belts, snack food conveyor belts, beer conveyor belts, and seafood and aquatic product conveyor belts.
The PTFE Teflon bun making machine non-stick food conveyor belt is made of non-toxic materials. It is non-toxic, odorless and has a smooth surface. It is suitable for transporting food and food raw materials. The Teflon bun making machine non-stick food conveyor belt is made of non-toxic materials. It is non-toxic, odorless and has a smooth surface. It is suitable for transporting food and food raw materials.
Care and Maintenance for PTFE Teflon steamed bun machine non-stick conveyor belt:
*When transporting and storing food conveyor belts, they should be kept clean, avoid direct sunlight or soaking in rain and snow, and prevent contact with acids, alkali oils, organic solvents and other substances, and should be kept 1 meter away from the heating device. The temperature in the warehouse should be maintained between -18°C and 40°C, and the relative temperature should be maintained between 50% and 80% RH.
*During storage, the product should be rolled into a roll and should not be folded. During the placement process, it should be turned over every quarter. Conveyor belts of different types, specifications, and layers should not be connected together. The joints should be glued.
*The type, structure, specifications and number of layers of the conveyor belt should be reasonably selected according to the conditions of use. The running speed of the conveyor belt should generally not be greater than 2.5 meters/second. For materials with large lumps and large wear and fixed plow unloading devices, the speed should be as low as possible. The diameter of the conveyor's transmission roller, the closure of the conveyor belt cloth layer, the supporting facilities of the reciting roller and the steering roller, and the requirements for the groove angle of the roller should be reasonably selected according to the design regulations of the conveyor.
*The feeding direction should conform to the running direction of the tape. In order to reduce the impact on the tape when the material falls, a chute should be used to reduce the material falling distance; the roller spacing should be shortened in the tape feeding section and a buffer roller should be used. In order to prevent material leakage, a soft and moderate baffle should be used on the belt side to avoid the baffle being too hard and scratching the surface of the conveyor belt.
Things to note when using the PTFE Teflon steamed bun machine non-stick conveyor belt:
(1) Prevent the roller from being covered with materials, resulting in poor rotation, and prevent leakage material from getting stuck between the roller and the belt. Pay attention to the lubrication of the moving parts, but do not use oily conveyor belts;
(2) Avoid starting with load;
(3) When the tape deviates, timely measures should be taken to correct it;
(4) If local tape operations are found, they should be repaired in time to avoid expansion;
(5) Avoid the tape being blocked by the frame, pillars or block materials to prevent collision and tearing.
Contact: Miss Cassie
Phone: +86 18395896609
Tel: +86 574 56255683
Fax: +86 574 56255680
Add: Changwei Industrial Park, Bangxing Road, Yinzhou District, Ningbo City, Zhejiang Province, China. Zip code: 315100